Kontrola zraka
PRO Signal
Upozorava na “ustajali” zrak prije nego što primijetite da je postao neugodan. Senzor za CO2 na površini senzora prisutnosti PRO Control Air PRO Signal AP, idealan za praćenje kvalitete zraka na sastanku, treningu, konferencijskim dvoranama, klasičnim sobama, uredima i domu, sustav semafora pruža informacije o kvaliteti zraka i potrebu za svježim zrakom, klimatizacija se uključuje relejom.
Verzije: AP, UP
Opis – PRO Signal
Za bolju kvalitetu zraka. I manje glavobolja.
Svijetle misli trebaju dobar zrak za razmišljanje. No, na sastancima, treninzima i u konferencijskim dvoranama, koncentracija CO₂ brzo doseže razine koje uzrokuju pospanost, a da nitko zapravo ne primjećuje. CO₂ senzor za kontrolu zraka prati kakvoću zraka i odgovara na porast koncentracije CO₂. Pokazujući kvalitetu zraka pomoću zelenih, žutih i crvenih LED dioda, automatski uključuje ventilaciju ako je priključen na klima uređaj. Inteligentni detektor je samokalibrirajući, daje akustično upozorenje i odgovara dizajnu detektora prisutnosti tvrtke STEINEL.
Tehničke karakteristike
| European Article Number (EAN) | 4007841592707 |
| Dimensions(w x h x d) | 120 x 120 x 49 mm |
| Application | inside buildings |
| Installation | Ceiling |
| Type of gas | CO2 |
| Voltage | 230 VAC |
| Type of messaging | Optic/acoustic |
| Operating voltage | 230 V |
| CO2 measurement range | 400 – 2000 ppm |
| CO2 accuracy | 5% of value measured ± 150ppm (at 25°C and 1013 hPa) |
| Indicated by LED | Green: up to 1000 ppm CO2 (light ‘ON’ permanently, can be switched ‘OFF’) Orange: from 1000 ppm CO2 to 1500 ppm CO2, (light permanently ‘ON’) Red: over 1500 ppm CO2 (flashing) Acoustic warning signal: every 5 min. above 1500 ppm CO2 (can be switched off) |
| Warning signal | every 5 min. above 1500 ppm CO₂ (can be switched off) |
| Temperature dependence of CO2 | < 5 ppm per °C |
| Temperature (storage) | -40-+70 °C |
| Relay (function) | Relay ON from 1200ppm Relay OFF below 800 ppm (with falling CO2 concentration) |
| Response time (T90) | 5 min |
| Signal output | Contact type: type 1.3 |
| Housing | UV-resistant plastic |
| IP rating | IP20 |
| Model | AP |
Download
Operating instructions (PDF, 2.79 MB)
Technical drawing (PDF, 151.66 KB)
Tendering text DE (DOC, 100.5 KB)
Tendering text GB (DOC, 27.5 KB)
Data sheet
| European Article Number (EAN) | 4007841592608 |
| Dimensions(w x h x d) | 120 x 120 x 53 mm |
| Application | inside buildings |
| Installation | Ceiling |
| Type of gas | CO2 |
| Voltage | 230 VAC |
| Type of messaging | Optic/acoustic |
| Operating voltage | 230 V |
| CO2 measurement range | 400 – 2000 ppm |
| CO2 accuracy | 5% of value measured ± 150ppm (at 25°C and 1013 hPa) |
| Indicated by LED | Green: up to 1000 ppm CO2 (light ‘ON’ permanently, can be switched ‘OFF’) Orange: from 1000 ppm CO2 to 1500 ppm CO2, (light permanently ‘ON’) Red: over 1500 ppm CO2 (flashing) Acoustic warning signal: every 5 min. above 1500 ppm CO2 (can be switched off) |
| Temperature dependence of CO2 | < 5 ppm per °C |
| Temperature (storage) | -40-+70 °C |
| Relay (function) | Relay ON from 1200ppm Relay OFF below 800 ppm (with falling CO2 concentration) |
| Response time (T90) | 5 min |
| Signal output | Contact type: type 1.3 |
| Housing | UV-resistant plastic |
| IP rating | IP20 |
| Model | UP |
Download
Operating instructions (PDF, 2.79 MB)
Technical drawing (PDF, 151.66 KB)
Tendering text DE (DOC, 100.5 KB)
Tendering text GB (DOC, 27.5 KB)
Data sheet
