Detektor prisutnosti
IR Quattro
Infracrveni detektor prisutnosti PRO IR Quattro KNX za unutarnju ugradnju, idealan za male urede, trgovine, servisne i komunalne prostorije, WC, visina ugradnje do 8 m, s digitalnim BUS sučeljem za upravljanje 4 rasvjetna kanala i HVAC, 1760 preklopnih zona za izvrsnu kvalitetu detekcije, otkrivanje prisutnosti u kvadratnoj zoni koja pokriva 16 m2, mehanički skalabilna.
Verzije: KNX, COM1, COM1 AP, COM2, DALI, DIM
Opis – IR Quattro
Visoka kvaliteta detekcije u malim sobama.
Mali ured, kao i skladišni, servisni, uslužni prostor i praonica rublja trebali bi se pouzdano integrirati u KNX sustav. Sa svojih 1.760 preklopnih zona, IR Quattro KNX je idealno rješenje. Njegov doseg je beskonačno skalabilan unutar 16 m² kvadratnog područja za otkrivanje prisutnosti. Bez ikakvog gubitka kvalitete. Omogućava precizno planiranje.
Tehničke karakteristike
| European Article Number (EAN) | 4007841008772 |
| Dimensions | 120 x 120 x 76 mm |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Power supply | KNX bus voltage |
| Recommended installation height | 2.5-8,00 m |
| Sensor system | 13 detection levels 1760 switching zones |
| Application | inside buildings |
| Installation | Ceiling |
| Settings | by means of ETS software, remote control or bus |
| Square presence detection zone | 4 x 4 m max. (16m²) |
| Square radial detection zone | 5 x 5 m max. (25m²) |
| Square tangential detection zone | 7 x 7 m max. (49m²) |
| Reach mechanically adjustable | Yes |
| Lighting channels Light 1 – Light 4 | Switching/dimming, switching mode, constant lighting control, stay-ON time |
| Basic brightness | Permanently ON, 1 – 255 min, 10-50% = all night |
| Switch-‘ON’ delay | Room surveillance, 0-255 min., Stay-ON time 1-255 min. |
| Presence stay “ON” time output | 1-255 sec. or 1-255 min. |
| HVAC output | depending on presence |
| Further outputs | Light level, sabotage protection |
| Light level output | in lux |
| IP rating | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Protection class | II |
| Temperature range | -25-+55 |
| Model | KNX |
Download
KNX application (PDF, 1.31 MB)
KNX software (VD5, 256.62 KB)
Operating instructions (PDF, 6.32 MB)
Operating instructions 2 (PDF, 6.33 MB)
Technical drawing (PDF, 138.55 KB)
Tendering text DE (DOC, 85 KB)
Tendering text GB (DOC, 86 KB)
Data Sheet
| European Article Number (EAN) | 4007841002718 |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Application | inside buildings |
| Installation | Ceiling |
| Recommended installation height | 2.5-8 m |
| Dimensions (h x w x d), concealed mounting | 120 x 120 x 76 mm |
| Dimensions (w x h x d) surface mounting | 120 x 120 x 71 mm |
| Voltage | 230 V, 50/60 Hz |
| max. number of electronic ballasts | 50 |
| Square presence detection zone | 4 x 4 m max. (16m²) |
| Square radial detection zone | 5 x 5 m max. (25m²) |
| Square tangential detection zone | 7 x 7 m max. (49m²) |
| Reach mechanically adjustable | Yes |
| Sensor system | 13 detection levels 1760 switching zones |
| User-friendly setting capability | Teach-in (with optional remote control RC8) |
| Light-level setting | 10 – 1000 lux, ?/daylight |
| Light-level setting DIM | 100 – 1000 lx ∞ / daylight |
| Function setting by DIP switches | DIP 1: Normal / test mode DIP 2: Semi- / fully automatic mode DIP 3: Pushbutton / switch mode DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’ |
| Teach-function for response value luminosity | Yes |
| Parallel-connected configurations | Master/slave Master/master |
| Can be connected in parallel | Yes |
| Time setting | 30 sec. – 30 min., pulse mode (approx. 2 sec.) IQ mode (automatic adjustment to usage profile) |
| Response value luminosity | 100-1000 lx |
| Degree of protection (IP) | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Temperature | -25-55 °C |
| Housing | UV-resistant, paintable |
| Model | DIM |
Download
Operating instructions (PDF, 6.01 MB)
Operating instructions 2 (PDF, 6.35 MB)
Technical drawing (PDF, 138.55 KB)
Tendering text DE (DOC, 86 KB)
Tendering text GB (DOC, 86 KB)
Data Sheet
| European Article Number (EAN) | 4007841000349 |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Application | inside buildings |
| Installation | Ceiling |
| Recommended installation height | 2.5-8 m |
| Dimensions (h x w x d), concealed mounting | 120 x 120 x 76 mm |
| Dimensions (w x h x d) surface mounting | 120 x 120 x 71 mm |
| Voltage | 230 V, 50/60 Hz |
| Square presence detection zone | 4 x 4 m max. (16m²) |
| Square radial detection zone | 5 x 5 m max. (25m²) |
| Square tangential detection zone | 7 x 7 m max. (49m²) |
| Reach mechanically adjustable | Yes |
| Sensor system | 13 detection levels 1760 switching zones |
| User-friendly setting capability | Teach-in (with optional remote control RC8) |
| Light-level setting | 10 – 1000 lux, ?/daylight |
| Light-level setting DIM | 100 – 1000 lx ∞ / daylight |
| Function setting by DIP switches | DIP 1: Normal / test mode DIP 2: Semi- / fully automatic mode DIP 3: Pushbutton / switch mode DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’ |
| Teach-function for response value luminosity | Yes |
| Parallel-connected configurations | Master/slave Master/master |
| Time setting | 30 sec. – 30 min., pulse mode (approx. 2 sec.) IQ mode (automatic adjustment to usage profile) |
| Response value luminosity | 10-1000 lx |
| Degree of protection (IP) | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Temperature | -25-55 °C |
| Housing | UV-resistant, paintable |
| Model | COM1 |
Download
Operating instructions (PDF, 6.01 MB)
Operating instructions 2 (PDF, 6.35 MB)
Technical drawing (PDF, 138.55 KB)
Tendering text DE (DOC, 88 KB)
Tendering text GB (DOC, 87 KB)
Data Sheet
| European Article Number (EAN) | 4007841592301 |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Application | inside buildings |
| Installation | Ceiling |
| Recommended installation height | 2.5-8 m |
| Dimensions (h x w x d), concealed mounting | 120 x 120 x 76 mm |
| Dimensions (w x h x d) surface mounting | 120 x 120 x 71 mm |
| Voltage | 230 V, 50/60 Hz |
| Square presence detection zone | 4 x 4 m max. (16m²) |
| Square radial detection zone | 5 x 5 m max. (25m²) |
| Square tangential detection zone | 7 x 7 m max. (49m²) |
| Reach mechanically adjustable | Yes |
| Sensor system | 13 detection levels 1760 switching zones |
| User-friendly setting capability | Teach-in (with optional remote control RC8) |
| Light-level setting | 10 – 1000 lux, ?/daylight |
| Light-level setting DIM | 100 – 1000 lx ∞ / daylight |
| Function setting by DIP switches | DIP 1: Normal / test mode DIP 2: Semi- / fully automatic mode DIP 3: Pushbutton / switch mode DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’ |
| Teach-function for response value luminosity | Yes |
| Parallel-connected configurations | Master/slave Master/master |
| Can be connected in parallel | Yes |
| Time setting | 30 sec. – 30 min., pulse mode (approx. 2 sec.) IQ mode (automatic adjustment to usage profile) |
| Response value luminosity | 10-1000 lx |
| Degree of protection (IP) | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Temperature | -25-55 °C |
| Housing | UV-resistant, paintable |
| Model | COM1 AP |
Download
Operating instructions (PDF, 6.35 MB)
Operating instructions 2 (PDF, 6.01 MB)
Technical drawing (PDF, 138.55 KB)
Tendering text DE (DOC, 88 KB)
Tendering text GB (DOC, 87 KB)
Data Sheet
| European Article Number (EAN) | 4007841000356 |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Application | inside buildings |
| Installation | Ceiling |
| Recommended installation height | 2.5-8 m |
| Dimensions (h x w x d), concealed mounting | 120 x 120 x 76 mm |
| Dimensions (w x h x d) surface mounting | 120 x 120 x 71 mm |
| Voltage | 230 V, 50/60 Hz |
| Square presence detection zone | 4 x 4 m max. (16m²) |
| Square radial detection zone | 5 x 5 m max. (25m²) |
| Square tangential detection zone | 7 x 7 m max. (49m²) |
| Reach mechanically adjustable | Yes |
| Sensor system | 13 detection levels 1760 switching zones |
| User-friendly setting capability | Teach-in (with optional remote control RC8) |
| Light-level setting | 10 – 1000 lux, ?/daylight |
| Light-level setting DIM | 100 – 1000 lx ∞ / daylight |
| Function setting by DIP switches | DIP 1: Normal / test mode DIP 2: Semi- / fully automatic mode DIP 3: Pushbutton / switch mode DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’ |
| Teach-function for response value luminosity | Yes |
| Parallel-connected configurations | Master/slave Master/master |
| Can be connected in parallel | Yes |
| Time setting | 30 sec. – 30 min., pulse mode (approx. 2 sec.) IQ mode (automatic adjustment to usage profile) |
| Response value luminosity | 10-1000 lx |
| Degree of protection (IP) | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Temperature | -25-55 °C |
| Housing | UV-resistant, paintable |
| Model | COM2 |
Download
Operating instructions (PDF, 6.01 MB)
Operating instructions 2 (PDF, 6.35 MB)
Technical drawing (PDF, 138.55 KB)
Tendering text DE (DOC, 86.5 KB)
Tendering text GB (DOC, 87.5 KB)
Data Sheet
| European Article Number (EAN) | 4007841002749 |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Application | inside buildings |
| Installation | Ceiling |
| Recommended installation height | 2.5-8 m |
| Dimensions (h x w x d), concealed mounting | 120 x 120 x 76 mm |
| Dimensions (w x h x d) surface mounting | 120 x 120 x 71 mm |
| Voltage | 230 V, 50/60 Hz |
| Square presence detection zone | 4 x 4 m max. (16m²) |
| Square radial detection zone | 5 x 5 m max. (25m²) |
| Square tangential detection zone | 7 x 7 m max. (49m²) |
| Reach mechanically adjustable | Yes |
| Sensor system | 13 detection levels 1760 switching zones |
| User-friendly setting capability | Teach-in (with optional remote control RC8) |
| Light-level setting | 10 – 1000 lux, ?/daylight |
| Light-level setting DIM | 100 – 1000 lx ∞ / daylight |
| DALI output 1 | 2-core DALI control cable / broadcast |
| DALI output 2 | 2-core DALI control cable / broadcast |
| Controllable DALI electronic ballasts | 12 DALI electronic ballasts per output |
| Function setting by DIP switches | DIP 1: Normal / test mode DIP 2: Semi- / fully automatic mode DIP 3: Pushbutton / switch mode DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’ |
| Teach-function for response value luminosity | Yes |
| Parallel-connected configurations | Master/slave Master/master |
| Can be connected in parallel | Yes |
| Time setting | 30 sec. – 30 min., pulse mode (approx. 2 sec.) IQ mode (automatic adjustment to usage profile) |
| Response value luminosity | 10-1000 lx |
| Degree of protection (IP) | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Temperature | -25-55 °C |
| Housing | UV-resistant, paintable |
| Model | DALI |
Download
Operating instructions (PDF, 6.85 MB)
Operating instructions 2 (PDF, 6.42 MB)
Technical drawing (PDF, 138.55 KB)
Tendering text DE (DOC, 86.5 KB)
Tendering text GB (DOC, 86 KB)
Data Sheet
