Detektor prisutnosti
IR Quattro HD
Otkriva i najsitnije! Detektor prisutnosti PRO IR Quattro HD COM1 AP za ugostiteljstvo, idealan za urede srednje i velike, konferencijske i dvorane za sastanke, učionice i kazališta, sportske dvorane i skladišta, visina ugradnje do 10 m, površinska montaža za prebacivanje svjetla ‘ON’ i ‘OFF’, 4800 preklopnih zona za vrhunsku kvalitetu detekcije, detekcija prisutnosti preko 64 m2, kvadratna zona otkrivanja, mehanički skalabilna.
Verzije: LiveLink, COM1, COM1 AP, COM2, DALI, DIM, KNX
Opis – IR Quattro HD
Uklapa se na strop. I vidi što drugi sanjaju.
HD nije pojam koji se odnosi samo na televizore, jer se od sada koristi i u detektorima prisutnosti. Zato što IR Quattro HD omogućuje iznimno visoku razlučivost. 4,800 preklopnih zona i četverokutna površina za otkrivanje koja pokriva 64 m² ne ostavlja nikakvu marginu za slučajne pokrete. Jedinstven: Znak prisutnosti može se mehanički skalirati bez najmanjih gubitaka kvalitete. To znači da se IR Quattro HD instalira u srednjim i velikim uredima, konferencijskim dvoranama i sobama za sastanke, sobama za učionice i predavaonicama te sportskim dvoranama i skladištima te se može konfigurirati s apsolutnom preciznošću.
Tehničke karakteristike
| European Article Number (EAN) | 4007841009717 |
| Dimensions | 120 x 120 x 70 mm |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Current consumption | 3 DALI user |
| Recommended installation height | 2.5-10 m |
| Sensor system | 13 detection levels 4800 switching zones |
| Application | inside buildings |
| Installation | Ceiling |
| Detection angle | 360° |
| Settings | via LiveLink app |
| Square presence detection zone | 8 x 8 m max. (64m²) |
| Square radial detection zone | 8 x 8 m max. (64m²) |
| Square tangential detection zone | 20 x 20 m max. (400m²) |
| Housing | UV-resistant plastic |
| Model | LiveLink |
Download
Operating instructions (PDF, 2,48 MB)
Operating instructions 2 (PDF, 11 MB)
Tendering text DE (DOC, 162,5 KB)
Tendering text GB (DOC, 163 KB)
Data sheet
| European Article Number (EAN) | 4007841002794 |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Application | inside buildings |
| Installation | Ceiling |
| Recommended installation height | 2.5-10 m |
| Dimensions(w x h x d) | 120 x 120 x 70 mm |
| Dimensions (w x h x d) surface mounting | 120 x 120 x 65 mm |
| Voltage | 230 V, 50/60 Hz |
| Square presence detection zone | 8 x 8 m max. (64m²) |
| Square radial detection zone | 8 x 8 m max. (64m²) |
| Square tangential detection zone | 20 x 20 m max. (400m²) |
| Reach mechanically adjustable | Yes |
| Sensor system | 13 detection levels 4800 switching zones |
| User-friendly setting capability | Teach-in (with optional remote control RC8) |
| Light-level setting | 10 – 1000 lux, ?/daylight |
| Light-level setting DIM | 100 – 1000 lx ∞ / daylight |
| Function setting by DIP switches | DIP 1: Normal / test mode DIP 2: Semi- / fully automatic mode DIP 3: Pushbutton / switch mode DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’ DIP 5: Constant-lighting control ‘ON’-‘OFF’ |
| Teach-function for response value luminosity | Yes |
| Parallel-connected configurations | Master/slave Master/master |
| Response value luminosity | 10-1000 lx |
| Degree of protection (IP) | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Temperature | -25-55 °C |
| Housing | UV-resistant, paintable |
| Model | COM1 |
Download
Operating instructions (PDF, 4.33 MB)
Operating instructions 2 (PDF, 4.36 MB)
Technical drawing (PDF, 138.95 KB)
Tendering text DE (DOC, 163 KB)
Tendering text GB (DOC, 163 KB)
Data sheet
| European Article Number (EAN) | 4007841592400 |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Application | inside buildings |
| Installation | Ceiling |
| Recommended installation height | 2.5-10 m |
| Dimensions(w x h x d) | 120 x 120 x 70 mm |
| Dimensions (w x h x d) surface mounting | 120 x 120 x 65 mm |
| Voltage | 230 V, 50/60 Hz |
| Square presence detection zone | 8 x 8 m max. (64m²) |
| Square radial detection zone | 8 x 8 m max. (64m²) |
| Square tangential detection zone | 20 x 20 m max. (400m²) |
| Reach mechanically adjustable | Yes |
| Sensor system | 13 detection levels 4800 switching zones |
| User-friendly setting capability | Teach-in (with optional remote control RC8) |
| Light-level setting | 10 – 1000 lux, ?/daylight |
| Light-level setting DIM | 100 – 1000 lx ∞ / daylight |
| Function setting by DIP switches | DIP 1: Normal / test mode DIP 2: Semi- / fully automatic mode DIP 3: Pushbutton / switch mode DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’ DIP 5: Constant-lighting control ‘ON’-‘OFF’ |
| Teach-function for response value luminosity | Yes |
| Parallel-connected configurations | Master/slave Master/master |
| Response value luminosity | 10-1000 lx |
| Degree of protection (IP) | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Temperature | -25-55 °C |
| Housing | UV-resistant, paintable |
| Model | COM1 AP |
Download
Operating instructions (PDF, 6.01 MB)
Operating instructions 2 (PDF, 6.35 MB)
Technical drawing (PDF, 138.95 KB)
Tendering text DE (DOC, 163 KB)
Tendering text GB (DOC, 163 KB)
Data sheet
| European Article Number (EAN) | 4007841002770 |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Application | inside buildings |
| Installation | Ceiling |
| Recommended installation height | 2.5-10 m |
| Dimensions(w x h x d) | 120 x 120 x 70 mm |
| Dimensions (w x h x d) surface mounting | 120 x 120 x 65 mm |
| Voltage | 230 V, 50/60 Hz |
| Square presence detection zone | 8 x 8 m max. (64m²) |
| Square radial detection zone | 8 x 8 m max. (64m²) |
| Square tangential detection zone | 20 x 20 m max. (400m²) |
| Reach mechanically adjustable | Yes |
| Sensor system | 13 detection levels 4800 switching zones |
| User-friendly setting capability | Teach-in (with optional remote control RC8) |
| Light-level setting | 10 – 1000 lux, ?/daylight |
| Light-level setting DIM | 100 – 1000 lx ∞ / daylight |
| Function setting by DIP switches | DIP 1: Normal / test mode DIP 2: Semi- / fully automatic mode DIP 3: Pushbutton / switch mode DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’ DIP 5: Constant-lighting control ‘ON’-‘OFF’ |
| Teach-function for response value luminosity | Yes |
| Parallel-connected configurations | Master/slave Master/master |
| Response value luminosity | 10-1000 lx |
| Degree of protection (IP) | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Temperature | -25-55 °C |
| Housing | UV-resistant, paintable |
| Model | COM2 |
Download
Operating instructions (PDF, 6.35 MB)
Operating instructions 2 (PDF, 6.01 MB)
Technical drawing (PDF, 138.95 KB)
Tendering text DE (DOC, 162.5 KB)
Tendering text GB (DOC, 162.5 KB)
Data sheet
| European Article Number (EAN) | 4007841002756 |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Detection angle | 300° with 180° angle of aperture |
| Application | inside buildings |
| Installation | Ceiling |
| Mounting height | max. 4 m |
| Recommended installation height | 2.5-10 m |
| Dimensions(w x h x d) | 120 x 120 x 70 mm |
| Dimensions (w x h x d) surface mounting | 120 x 120 x 65 mm |
| Voltage | 230 V, 50/60 Hz |
| Square presence detection zone | 8 x 8 m max. (64m²) |
| Square radial detection zone | 8 x 8 m max. (64m²) |
| Square tangential detection zone | 20 x 20 m max. (400m²) |
| Settings | by means of ETS software, remote control or bus |
| Lighting channels Light 1 – Light 4 | Switching/dimming, switching mode, constant lighting control, stay-ON time |
| Basic brightness | Permanently ON, 1 – 255 min, 10-50% = all night |
| Reach mechanically adjustable | Yes |
| Sensor system | 13 detection levels 4800 switching zones |
| User-friendly setting capability | Teach-in (with optional remote control RC8) |
| Light-level setting | 10 – 1000 lux, ?/daylight |
| Light-level setting DIM | 100 – 1000 lx ∞ / daylight |
| DALI output 1 | 2-core DALI control cable / broadcast |
| DALI output 2 | 2-core DALI control cable / broadcast |
| Controllable DALI electronic ballasts | 12 DALI electronic ballasts per output |
| Function setting by DIP switches | DIP 1: Normal / test mode DIP 2: Semi- / fully automatic mode DIP 3: Pushbutton / switch mode DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’ DIP 5: Constant-lighting control ‘ON’-‘OFF’ |
| Teach-function for response value luminosity | Yes |
| Parallel-connected configurations | Master/slave Master/master |
| Manual override | selectable |
| HVAC switch-ON delay | 0 sec. – 10 min., KNX: ETS |
| HVAC output | depending on presence |
| Photo-cell controller output | Switching response governed by light level |
| Response value luminosity | 10-1000 lx |
| Degree of protection (IP) | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Temperature | -25-55 °C |
| Housing | UV-resistant, paintable |
| Model | DALI |
Download
Operating instructions (PDF, 6.85 MB)
Operating instructions 2 (PDF, 6.42 MB)
Technical drawing (PDF, 138.95 KB)
Tendering text DE (DOC, 162.5 KB)
Tendering text GB (DOC, 163 KB)
Data sheet
| European Article Number (EAN) | 4007841002787 |
| Model | Presence detector |
| Sensor type | Passive infrared |
| Application | inside buildings |
| Installation | Ceiling |
| Recommended installation height | 2.5-10 m |
| Dimensions(w x h x d) | 120 x 120 x 70 mm |
| Dimensions (w x h x d) surface mounting | 120 x 120 x 65 mm |
| Voltage | 230 V, 50/60 Hz |
| max. number of electronic ballasts | 50 |
| Square presence detection zone | 8 x 8 m max. (64m²) |
| Square radial detection zone | 8 x 8 m max. (64m²) |
| Square tangential detection zone | 20 x 20 m max. (400m²) |
| Reach mechanically adjustable | Yes |
| Sensor system | 13 detection levels 4800 switching zones |
| User-friendly setting capability | Teach-in (with optional remote control RC8) |
| Light-level setting | 10 – 1000 lux, ?/daylight |
| Light-level setting DIM | 100 – 1000 lx ∞ / daylight |
| Function setting by DIP switches | DIP 1: Normal / test mode DIP 2: Semi- / fully automatic mode DIP 3: Pushbutton / switch mode DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’ DIP 5: Constant-lighting control ‘ON’-‘OFF’ |
| Teach-function for response value luminosity | Yes |
| Parallel-connected configurations | Master/slave Master/master |
| Response value luminosity | 10-1000 lx |
| Degree of protection (IP) | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Temperature | -25-55 °C |
| Housing | UV-resistant, paintable |
| Model | DIM |
Download
Operating instructions (PDF, 4.33 MB)
Operating instructions 2 (PDF, 4.36 MB)
Technical drawing (PDF, 138.95 KB)
Tendering text DE (DOC, 162.5 KB)
Tendering text GB (DOC, 163 KB)
Data sheet
| European Article Number (EAN) | 4007841008789 |
| Dimensions | 120 x 120 x 70 mm |
| Model | Presence detector |
| Power supply | KNX bus voltage |
| Recommended installation height | 2.5-10,00 m |
| Sensor system | 13 detection levels 4800 switching zones |
| Application | inside buildings |
| Installation | Ceiling |
| Settings | by means of ETS software, remote control or bus |
| Square presence detection zone | 8 x 8 m max. (64m²) |
| Square radial detection zone | 8 x 8 m max. (64m²) |
| Square tangential detection zone | 20 x 20 m max. (400m²) |
| Lighting channels Light 1 – Light 4 | Switching/dimming, switching mode, constant lighting control, stay-ON time |
| Basic brightness | Permanently ON, 1 – 255 min, 10-50% = all night |
| Switch-‘ON’ delay | Room surveillance, 0-255 min., Stay-ON time 1-255 min. |
| HVAC output | depending on presence |
| Further outputs | Light level, sabotage protection |
| Light level output | in lux |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Protection class | II |
| Housing | UV-resistant, paintable |
| Model | KNX |
Download
KNX application (PDF, 1.31 MB)
KNX software (VD5, 256.62 KB)
Operating instructions (PDF, 6.32 MB)
Operating instructions 2 (PDF, 6.33 MB)
Technical drawing (PDF, 138.95 KB)
Tendering text DE (DOC, 162 KB)
Tendering text GB (DOC, 162.5 KB)
Data sheet
